ENQUIRE NOW

Low Alloy Steel Wire

MAXFIL-1401G5

AWS: SFA

EN ISO CODE:

Maxfil-1401G5 is a low alloy steel flux cored wire designed for welding of high tensile strength steel, quenched, and tempered steels etc. The weld metal is suitable for the fabrication of dynamically loaded structures and results in good impact-resistant properties at sub-zero temperatures. The wire gives optimum performance under CO₂ shielding with radiographic quality weld deposits. The weld has an excellent bead appearance and easy slag removal.

Maxfil-1401G5 is designed for single and multi-pass welding of similar composition steels, fine-grained steels, and equivalent grade steels like: HY-80, Sumiten-610, C/D Grades of SA-225, B/C Grades of SA-543, steels conforming to SA-612 grade, A/B/C grades of SA-738, etc.

Approvals

Typical Chemical Composition Of All Weld Metal (%):

Element	C	Mn	Si	Cr	Ni	Mo	S	P	V
Typical	0.08	1.8	0.40	1.0	2.5	0.90	0.015	0.015	0.06

Typical Mechanical Properties Of All Weld Metal:

Properties	UTS (MPa)	YS (MPa)	% El (L=4d)	CVN Impact Strength (J)
Typical Values	1000 Min	930 Min	18	70 Min (RT), 27 Min (-51°C)

Welding Positions:

All positions including flat, horizontal, and vertical up.

Welding Parameter : DC (+)

Diameter (mm)	Horizontal (V/A)	Flat (V/A)	Vertical Up (V/A)
1.20	24-28 V / 160-260 A	24-28 V / 160-260 A	18-22 V / 100-160 A
1.60	24-28 V / 180-300 A	24-28 V / 180-300 A	18-22 V / 110-200 A

Shielding Gas:

Carbon Dioxide CO₂ (100%) at flow rate of 15–22 litres per minute.

Packing Data:

Standard Size: 1.20 & 1.60 mm (Other diameters may be available on request)
Quantity: Supplied approximately 12.5/15 Kgs in a plastic spool. Each spool is vacuum sealed in polythene bag and then packed in a corrugated box.

Low Alloy Steel Wire