Contact Us
HOME> Conventional Welding Consumables > MAXFIL- 36B

DOWNLOAD SPECS

Low Alloy Steel Wire

MAXFIL- 36B

AWS: SFA 5.29 E80T5G-C EN ISO CODE: 17632-A T46 3 Z B C

Maxfil-36B is a low alloy steel flux cored wire designed for welding of medium tensile steels structures subjected to dynamic loading, pressure vessels, etc. The wire gives good performance under CO2 shielding with radiographic quality deposits. The weld metal has excellent crack resistance & toughness at sub-zero temperatures.

Maxfil-36B is designed for single and multi-pass welding of medium tensile steels like; Aldur 45/60, BH 39/47, BHW 27/30, fine grained steels and equivalent grade steels like; SA-841, A/B/C grades of SA-662, etc.

Approvals
    CE
CHEMICAL COMPOSITION OF ALL WELD METAL (%)


Element
CMnSiSPMo
Typical0.061.600.450.0110.0160.50


MECHANICAL PROPERTIES OF ALL WELD METAL


Property
UTSYSEl
CNV Impact (Joules)

(MPa)
(MPa)
(L= 4d)%
at -30°C
As Welded64753423.0
80
WELDING PARAMETER: DC (+)


Diameter (mm)HorizontalHorizontal Flat
Flat
Vertical UP
Vertical UP

Volt, VCurrent, AVolt, V
Current, AVolt, V
Current, A
1.2024-28160-26024-28160-26018-22
100-160
1.6024-28180-30024-28
180-30018-22
110-200
PACKING


STANDARD SIZE :   1.20 & 1.60mm. Other diameters may be available on request.

QUANTITY :   Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.

SHIELDING GAS


Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.

WELDING POSITIONS


H, F, VU