Contact Us
HOME> Conventional Welding Consumables > MAXFIL- 36B2

DOWNLOAD SPECS

Low Alloy Steel Wire

MAXFIL- 36B2

AWS: SFA 5.29 E80T5-B2C EN ISO CODE: 17632-B T55ZT5-0CP-G

Maxfil-36B2 is a low alloy steel flux cored wire designed for welding of creep resisting steels like; 0.5Cr-0.5Mo, 1Cr-0.5Mo, 1.25Cr-0.5Mo etc. for high temperature and pressure service conditions in steam pipes and boilers. The wire gives optimum performance under CO2 shielding with radiographic quality weld deposits. The wire produces thin & friable slag covering with shiny bead appearance.

Maxfil-36B2 is designed for single and multi-pass welding of similar composition steels and equivalent grade steels like; Gr. F2/F11/F12 of SA-182, Gr. T11 of SA-199, Gr. T2/T11/T12 of SA-213, Gr. WC6 of SA-217, Gr. P2/P11/P12 of SA-335, Gr. FP2/FP11/FP12 of SA-369, Gr. 2/11/12 of SA-387, Gr. CP2/CP11/CP12 of SA-426, etc.

Approvals
    CE
CHEMICAL COMPOSITION OF ALL WELD METAL (%)


Element
CMnSiSPCrMo
Range
0.05-0.121.250.800.0300.0301.00-1.500.40-0.65
Typical0.0650.960.340.0110.0181.240.51


MECHANICAL PROPERTIES OF ALL WELD METAL


Property
UTSYSEl

(MPa)
(MPa)
(L= 4d)%
Range
550-690
470 Min
19 Min
SR : 690°C/1Hr
58449024.0
WELDING PARAMETER: DC (+)


Diameter (mm)

Horizontal

Horizontal  Flat
Flat
Vertical UP
Vertical UP

Volt, VCurrent, AVolt, V
Current, AVolt, V
Current, A
1.2024-28160-26024-28160-26018-22
100-160
1.6024-28180-30024-28
180-30018-22
110-200
PACKING


STANDARD SIZE :   1.20 & 1.60mm. Other diameters may be available on request.

QUANTITY :   Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.

SHIELDING GAS


Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.

WELDING POSITION


H, F, VU