ENQUIRE NOW

Stainless Steel Wire

MAXFIL-410NiMo

AWS: SFA 5.22 E410NiMoT1-1

EN ISO CODE:

Maxfil-410NiMo is an all position stainless steel flux cored wire designed for optimum performance with 100% CO2 gas shielding which deposit 11.5Cr – 4.5Ni – 0.55Mo. This wire is designed with fast freezing slag characteristics and good slag detachability. The wire welds satisfactorily in out of position and performs equally well when welding in the flat & horizontal position.

Maxfil-410NiMo is designed for welding CA6NM castings used in hydroelectric turbines or similar applications etc.

Approvals

TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL (%)

Element	C	Mn	Si	S	P	Cr	Ni	Mo	Cu
Range	0.060	1.0	1.0	0.030	0.040	11.0-12.5	4.0-5.0	0.40-0.70	0.75
Typical	0.020	0.400	0.40	0.010	0.015	12.5	4.10	0.51	0.015

TYPICAL MECHANICAL PROPERTIES OF ALL WELD METAL

Property	UTS	El
	(MPa)	(L= 4d)%
Range	760 Min	15 Min
SR:620°C/1Hr	830	17

CURRENT & PACKING DATA: DC (+)

Diameter (mm)	Horizontal/ Flat	Horizontal/ Flat	Vertical UP	Vertical UP	Overhead	Overhead
	Volt, V	Current, A	Volt, V	Current, A	Volt, V	Current, A
1.20	24-30	160-260	20-22	100-160	22-25	100-160
1.60	24-30	180-300	20-22	110-200	22-25	110-200

PACKING

Standard size : 1.20 & 1.60mm.

Quantity : Supplied approximately 12.5/15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.

SHIELD GAS

Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.

WELDING POSITION:

H, F, VU, OH

Stainless Steel Wire