Contact Us
HOME> Conventional Welding Consumables > MAXFIL- 701G5

DOWNLOAD SPECS

Low Alloy Steel Wire

MAXFIL- 701G5

AWS: SFA 5.29 E70T5-GC

Maxfil-701G5 is a low alloy steel flux cored wire designed for welding of medium & high tensile strength steel, quenched & tempered steels, etc. where sub-zero impact resistance property of the weld metal is desired. The weld metal is designed for thick plates so that properties are maintained after stress relief heat treatment also. The wire is results optimum performance and radiographic quality weld deposits under CO2 shielding. The weld has excellent bead appearance and easy slag removal.

Maxfil-701G5 is designed for single and multi-pass welding of similar composition steels and equivalent grade steels like; NAXTRA-60/65, Sumiten-610, A/B grades of SA-203, D/ E/ F/ G grades of SA-414, steel grades conforming to SA-455, Gr.60 & Gr.65 steels of SA-515 & SA-516, etc. Based on the composition & plate thickness, preheating & inter-pass temperature shall be maintained.

CHEMICAL COMPOSITION OF ALL WELD METAL (%)


Element
CMnSiSPNiMo
Typical0.0621.240.440.0150.0220.650.25


MECHANICAL PROPERTIES OF ALL WELD METAL


Property
UTSYSEl
CNV Impact (Joules)

(MPa)
(MPa)
(L= 4d)%
at -46°C
SR : 620°C/2Hr
56251824.0
38



WELDING PARAMETER: DC (+)


Diameter (mm)HorizontalHorizontal FlatFlat
Vertical UP
Vertical UP

Volt, VCurrent, AVolt, V
Current, AVolt, V
Current, A
1.2024-28160-26024-28160-26018-22
100-160
1.6024-28180-30024-28
180-30018-22
110-200


PACKING


STANDARD SIZE :   1.20 & 1.60mm. Other diameters may be available on request.

QUANTITY :   Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.

SHIELDING GAS


Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.

WELDING POSITIONS


H, F, VU