Maxfil-MC-80 Ni is a 1% nickel low alloy gas shielded metal cored wire designed for high speed welding of steel sheets. The wire encompasses the deposition advantages of flux cored wire along with the high deposition efficiencies of a solid wire with both single and multi-layer applications. The deposited weld metal is virtually free from slag covering and thus reduces post-weld cleaning time. The wire burns with smooth arc and low spatter.
|Property||UTS||YS||El||CNV Impact (Joules)|
|(MPa)||(MPa)||(L= 4d)%||at -50°C|
|Range ||550-690||470 Min||19.0 Min||27.0 Min|
|Diameter (mm)||Horizontal||Horizontal|| Flat|| Flat|
|Volt, V||Current, A||Volt, V||Current, A|
Argon-Carbon Dioxide CO2 (80-20%) at flow rate 12-15 litres per minute.
Standard size : 1.20 & 1.60mm. Other diameters may be available on request.
Quantity : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an
air tight polythene bag and then packed in a corrugated box