Contact Us
HOME> Reclamation Welding Consumables > LoTherme-9560

DOWNLOAD SPECS

For Die Rebuilding and Surfacing

LoTherme-9560

High Cr forging die rebuilding alloy with High Deposition Rate. Shock Resistant Weld Metal even at elevated temperature.

CHARACTERSTICS

A specially designed alloy for surfacing /cladding of a new die and re-building of worn-out hot forging dies for better service life. The consumable has very good welder appeal and easy slag detachability. The deposited weld metal is martensitic stainless steel and highly resistant to heat, corrosion, wear & galling. It is free from cracks, porosities and any other surface defects. Its broad tempering range permits for conventional machining with carbide tools.

Applications :

LoTherme-9650 is suitable for weld-surfacing & reclamation of forging dies, hot working tools & guides, shallow hammer dies, screw press dies, impactor dies, etc.

WELD METAL HARDNESS:

As Welded : 40-45 HRC

SR 560 C for one hour : 38-43 HRC

Welding Technique :

Re-dry the electrodes at 250 C for 1 hour. When welding hardenable steels of large thickness, adequate care for preheating, slow cooling & post weld heat treatment are recommended for best results. Pre- heat heavy thickness jobs up to 400 C and maintain this while welding, with short arc, along with peening after every pass is necessary. After welding, cool in still air up to 200 C. Then charge these large dies into a furnace to hold at 560 C and temper for one hour per inch thickness of job and then slow cool to room temperature for machining.

Current Conditions : DC (+)

Size (mm)

6.3x450

5x450

4x450

3.15x450

Current Range (Amps)

250-280200-250

150-180

110-140




For Die Rebuilding and Surfacing