Contact Us
HOME> Reclamation Welding Consumables > LoTherme OA-352

DOWNLOAD SPECS

FCW Wires

LoTherme OA-352

An OA wire for Heavy Structural Fabrication

Characteristics

LoTherme OA-352 wire is designed for single and multiple pass flat & horizontal position welding for low & medium carbon steels where high impact properties are not required. It has high deposition rate, low penetration and especially suitable for poor joint fit up.

Applications

LoTherme OA-352 is suitable for construction of farm machinery, automobiles, field erection of structures, fabrication of frames, heavy equipment repair, etc.

Typical Mechanical Properties Of All Weld Metal

ULTIMATE TENSILE STRENGTH : 530 MPa

ELONGATION (L=4d) : 22 %

Current Conditions : DC (+)


Diameter (mm)
1.6
2.4
2.8
Current Range (Amps)
140-190
130-180
90-140
Voltage (V) 
26-2826-28
26-28
Stick Out (mm)
30-40
30-40
30-40


CURRENT AND PACKING DATA

Supplied in layer wound 12.5 kgs plastic spool. Each spool is sealed in a polythene bag and then packed in a shrink-wrapped corrugated box.


Note : Any other type of packaging, or other than standard wire sizes, may be available on request.

Standard Wire Diameter (mm):

1.6, 2.4 and 2.8