Wear plate for severe impact under heavy load
These have been developed to provide superlative Wearresistance on ferrous parts subject to high abrasion or erosion. Application includes Mill guards, Chutes, Scrappers, Clinker components, Mixer liners.
ALLOY BASIS : C, Mn, Si, Cr, Nb Ti
HARDNESS : As deposited 25 - 30 RC, Work hardened 48 - 52 RC
TEMPERATURE RESISTANCE: 200°C
APPLICATION : ON HIGH IMPACT AREAS
1) The construction is with Niobium and Titanium carbides in austenitic grain boundaries. It is therefore suitable for high impact and will also take abrasion due to these carbides.
2) The austenite changes to martensite on impact and therefore the wear resistance improves with impact. The hardness goes up from 25 RC to about 50 RC on Impact.
THICKNESS RANGES : 4+2, 5+3, 6+3, 6+4, 6+6, 8+3, 8+4, 8+5, 8+6, 8+7, 8+8, 10+3, 10+4, 10+5,.......... in mm As per requirements
PLATE SIZES : 3000 x 1000, 2200 x 1000 mm (2200 x 2200 - available on request for thickness above 16 mm)
Name printed on the plates & punched on the base plates.