Gas Shielded Flux cored wire
LoTherme-GS-64 was specifically designed for crack free hardbanding. This specially formulated wear resistant alloy produces a uniform distribution of small primary metal carbides in a martensitic matrix. It is a very casing friendly hardbanding material due to the weld deposit's low coefficient of friction as well as having excellent resistance to impact and plastic deformation.
75% Ar, Bal. CO2
|On a 3-layer deposit in as-weld condition||After SR at 450°C for 2 hours|
|58-62 HRC||42-48 HRC|
|Wire diameter, mm||Current, amp||Voltage, V||Stick out, mm|
|1.2||160 – 240||26 – 30||25 – 35|
|1.6||180 – 270||26 – 30||25 – 35|
DCEP/ DC (+)
1.2 mm and 1.6 mm.
Note: Any other diameter wires may be available on request.
Supplied in a layer wound 15 kg plastic spool. Each spool is sealed in polythene bag and then packed in a shrink-wrapped corrugated box.
Note: Any other type of packaging may be available on request.