ENQUIRE NOW

Mild Steel Wire

MAXFIL- 31B (SPL)

AWS: SFA 5.20 E71T-5M

EN ISO CODE: 17632-B T493T1-1MA-K

Maxfil-31B (Spl) is a mild steel flux cored wire suitable for all position welding with Argon-CO2 gas shielding. The wire gives smooth burning characteristics, low spatter and easy slag removal. Filler contour is flat to slightly convex with equal leg lengths and uniform sidewall fusion. The deposited weld metal is of radiographic quality. The deposited weld metal contains very low diffusible hydrogen (<5ml/100gms of weld metal).

Maxfil-31B (Spl) is designed for single and multi-pass welding of low and medium carbon steels grades like; C, D, E grades of SA-414, Gr.55, Gr.60 steels of SA-516 and equivalent grade steels, etc.

Approvals

TATA Steel Growth Shop Jamshedpur

CHEMICAL COMPOSITION OF ALL WELD METAL (%)

Element	C	Mn	Si	S	P	Cr	Ni	Mo	V	Cu
Range	0.12	1.75	0.90	0.03	0.03	0.20	0.50	0.30	0.08	0.35
Typical	0.10	0.80-1.70	0.30-0.80	0.025	0.025	0.015	0.020	0.005	0.018	0.010

MECHANICAL PROPERTIES OF ALL WELD METAL

Property	UTS	YS	El	CNV Impact (Joules)	CNV Impact (Joules)
	(MPa)	(MPa)	(L= 4d)%	at -20°C	at -30°C
Range	490-670	390 Min	22 Min	27 Min	27 Min
Typical	560	450	28.0	50	35

WELDING PARAMETER: DC (+)

Diameter (mm)	Horizontal/ Flat	Horizontal/ Flat	Vertical UP	Vertical UP	Overhead	Overhead
	Volt, V	Current, A	Volt, V	Current, A	Volt, V	Current, A
1.20	24-30	160-300	20-26	100-160	22-25	100-160
1.60	24-30	180-300	20-26	110-200	22-25	110-200

PACKING

STANDARD SIZE : 1.20 & 1.60mm. Other diameters may be available on request.

QUANTITY : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.

SHIELDING GAS

Argon - Carbon Dioxide CO2 (80:20%) at flow rate 12-15 litres per minute.

WELDING POSITIONS

H, F, VU, OH

Mild Steel Wire