Maxfil-40H is a basic type low alloy gas shielded hardfacing wire which is designed for air hardening type hard surfacing deposit. This hardfacing wire has good welder’s appeal & easy slag detachability. Though a little hard, the weld is machinable. The wire deposits a crack-free, martensitic weld metal suitable for heavy impact and moderate abrasion resistant applications.
Maxfil-40H hardfacing wire is suitable for weld-surfacing & reclamation of agricultural equipments, track rollers, links, shafts, pulleys, idle rollers, conveyor parts, axles, shear blades, etc where the applications call for a slight higher order of hardness (40-48 HRC).
|Property||2 Layer Hardness (HRC)||3 Layer Hardness (HRC)|
|Volt, V||Current, A||Volt, V||Current, A|
STANDARD SIZE: 1.20 & 1.60 mm. Other diameters may be available on request.
QUANTITY: Supplied approximately 15 Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.
Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.