- HOME
- Conventional Welding Consumables
- Stainless Steel Wire
- MAXFIL-308H
Stainless Steel Wire
MAXFIL-308H
AWS: SFA 5.22 E308HT1-1
EN ISO CODE:
Maxfil-308H is an all position stainless steel flux cored wire designed for optimum performance with 100% CO2 gas shielding. The higher carbon content provides improved creep properties at temperature above 400°C. This wire is designed with fast freezing slag characteristics and good slag detachability. The wire welds satisfactorily in out of position and performs equally well when welding in the flat & horizontal position. The weld metal is of radiographic quality, resistant to cracking, and very good oxidation & scaling resistant at elevated temperature.
Maxfil-308H is designed for welding of austenitic stainless steels such as 304H for elevated temperatures and their equivalents with excellent weld ability.
| Element | C | Mn | Si | S | P | Cr | Ni | Mo | Cu |
| Range | 0.040-0.080 | 0.5-2.5 | 1.0 | 0.030 | 0.040 | 18.0- 21.0 | 9.0-11.0 | 0.75 | 0.75 |
| Typical | 0.050 | 1.40 | 0.60 | 0.010 | 0.020 | 19.5 | 9.5 | 0.010 | 0.030 |
| Property | UTS | El |
| (MPa) | (L= 4d)% | |
| Range | 550 Min | 30 Min |
| As Weld | 560 | 40 |
| Diameter (mm) | Horizontal/ Flat | Horizontal/ Flat | Vertical UP | Vertical UP | Overhead | Overhead |
| Volt, V | Current, A | Volt, V | Current, A | Volt, V | Current, A | |
| 1.20 | 24-30 | 160-260 | 20-22 | 100-160 | 22-25 | 100-160 |
| 1.60 | 24-30 | 180-300 | 20-22 | 110-200 | 22-25 | 110-200 |
Standard size : 1.20 & 1.60mm. Other diameters may be available on request.
Quantity : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.
H, F, VU, OH
Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.
