Contact Us
HOME> Conventional Welding Consumables > MAXFIL- 308L

DOWNLOAD SPECS

Stainless Steel Wire

MAXFIL- 308L

AWS: SFA 5.22 E308LT1-1

Maxfil-308L is an all position stainless steel flux cored wire designed for optimum performance with 100% CO2 gas shielding. This wire is designed with fast freezing slag characteristics and good slag detachability. The wire welds satisfactorily in out of position and performs equally well when welding in the flat & horizontal position. The weld metal is of radiographic quality, resistant to cracking, and very good oxidation & scaling resistant at elevated temperature.

Maxfil-308L is designed for welding of low carbon similar composition steels like AISI 304/ 304L and their equivalents with excellent weld ability.

CHEMICAL COMPOSITION OF ALL WELD METAL (%)


Element
CMnSiSPCrNiMoCu
Range
0.0400.5-2.51.000.0300.04018.0-21.09.0-11.00.750.75
Typical0.0251.320.600.0100.01519.5
9.50.0100.030
MECHANICAL PROPERTIES OF ALL WELD METAL


Property
UTSEl

(MPa)
(L= 4d)%
Range 
520 Min
30 Min
As Weld
54038
WELDING PARAMETER: DC (+)


Diameter (mm)Horizontal/ FlatHorizontal/ Flat Vertical UPVertical UP
OverheadOverhead

Volt, VCurrent, AVolt, V
Current, AVolt, V
Current, A
1.2024-30
160-26020-22
100-16022-25
100-160
1.6024-30
180-30020-22
110-200
22-25
110-200
PACKING


STANDARD SIZE :   1.20 & 1.60mm.

QUANTITY :   Supplied approximately 12.5/15Kgs in a plastic spool. Each spool is sealed in an

air tight polythene bag and then packed in a corrugated box.

SHIELDING GAS


Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.

WELDING POSITIONS


H, F, VU, OH