D&H 1260 ENiCrMo-6
DOWNLOAD SPECS
DOWNLOAD SPECS

Electrodes for Nickel and it's Alloys

D&H 1260

AWS: SFA 5.11 ENiCrMo-6

D&H1260 is a nickel base electrode. It gives soft and smooth arc, which is easy to strike and re-strike. It is easy to operate in AC also. The weld metal is of radiographic quality and displays a good combination of strength and impact strength even at minus 196°C. Electrodes of sizes up to 3.15 mm dia metal can be used for welding in all positions. It is recommended to use other sizes in horizontal and flat positions for achieving better results. Ideal for welding 9% Nickel steel for cryogenic storage tanks for LNG and other similar alloys as well as the clad side of joints in steel clad with a Ni- Cr-Mo alloy and for welding Ni-Cr-Mo alloys to steel and to other nickel base alloys.

Precaution

1. Ensure the electrodes are dry. Re-dry the electrodes at 300-350°C for one hour.

2. Operate the electrodes wherever possible, weld in flat position only.

3. Maintain a short arc, use stringer bead and minimize the heat input.

TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL


Element
CMnSiPSNiMoCrWFeNb+Ta
Percent
0.083.00.500.0180.014Bal.7.014.0
1.5
7.0
1.5


MECHANICAL PROPERTIES OF ALL WELD METAL


UTSElongation
CVN Impact Strength 
(MPa)
(L=4d) %
at Minus 196°C  (J)
65038.090


CURRENT AND PACKING DATA: AC / DC(+)


Size (mm) Dia x Length
5x3504x350
3.15x350
2.5x350
Current Range (Amps)
180-230140-180
100-130
80-100
Weight / Carton (kgs)
2.52.5
2.5
2.5



Electrodes for Nickel and it's Alloys

Contact Us

Choose any option to contact us