EN ISO CODE:
Low heat input electrode producing outstanding quality machinable welds on cast iron.
LoTherme-705 is ideally suited for sound, crack free welds on grey cast iron, spheroidal iron, malleable cast iron to themselves, to each other, to steel, or to monel or copper alloys. Equally good for cladding, filling, surfacing and building up of worn-out parts or broken sections. Repair welding of valve bodies, sprockets, engine blocks, pump casings, gears, machine base and defective castings are some of the various applications of LoTherme-705.
Ultimate Tensile Strength : 345 MPa
Weld Metal Hardness : 150 BHN
Re-dry the electrode at 150°C for one hour before use. Clean weld area free of all surface contamination. Bevel broken parts or crack areas to about 70° Vee. For cold welding, use as low a current as possible and deposit short weld beads not exceeding 50 mm. Peen the welds. Pre-heating of the part is not necessary.
Dia x Length
|Current Range (Amps)||125-165||95-125||65-105||45-65|