A Gas-shielded wire for High Tensile Steel welding
LoTherme GS-355 is a gas shielded flux cored wire designed for welding of high tensile strength steel, quenched & tempered steels, surfacing & repair of low alloy steel, case hardened steel, etc. The weld deposit contains very low diffusible hydrogen and good resistant to cracks & fissures. The wire produces an easy to remove thin frible slag and results smooth & uniform radiographic quality bead.
LoTherme GS-355 designed for single and multi-pass welding of high tensile steels: HY-80, Sumiten-610, B/C grades of SA-543, steels conforming to SA-612 grade, A/B/C grades of SA-738, etc. The wire is also suitable for welding and surfacing of rolls, shafts, gear wheels, etc. Recommended with both CO and Ar-CO gas 2 2 mixture.
In as-weld condition : 785 MPa 19%
|Current Range (Amps)||160-240||180-270|
|Voltage (V) ||26-30||26-30|
|Stick Out (mm)||25-35||25-35|
Supplied in layer wound 15 kgs plastic spool. Each spool is sealed in a polythene bag and then packed in a shrink-wrapped corrugated box.
Note : Any other type of packaging, or other than standard wire sizes, may be available on request.
1.2mm and 1.6mm