EN ISO CODE:
An OA wire for Heavy Structural Fabrication
LoTherme OA-352 wire is designed for single and multiple pass flat & horizontal position welding for low & medium carbon steels where high impact properties are not required. It has high deposition rate, low penetration and especially suitable for poor joint fit up.
LoTherme OA-352 is suitable for construction of farm machinery, automobiles, field erection of structures, fabrication of frames, heavy equipment repair, etc.
ULTIMATE TENSILE STRENGTH : 530 MPa
ELONGATION (L=4d) : 22 %
|Current Range (Amps)||140-190||130-180||90-140|
|Voltage (V) ||26-28||26-28||26-28|
|Stick Out (mm)||30-40||30-40||30-40|
Supplied in layer wound 12.5 kgs plastic spool. Each spool is sealed in a polythene bag and then packed in a shrink-wrapped corrugated box.
Note : Any other type of packaging, or other than standard wire sizes, may be available on request.
1.6, 2.4 and 2.8