ENQUIRE NOW

Mild Steel Wire

MAXFIL- 12R

AWS: SFA 5.20 E71T-1C

EN ISO CODE: 17632-B T492T1-1CA-K

Maxfil-12R is an all-position mild steel flux cored wire designed for optimum performance on varied Voltage & Current range when using 100% CO2 & Mix gas (Ar+CO2) shielding. The wire is characterized with smooth metal transfer, uniform welding even pipe welding in 5G, 6G position, vertical-up position stringer beads and easy slag removal.

Filler contour is flat to slightly convex with equal leg lengths and uniform sidewall wetting. Weld metal will give excellent toughness property up to -46°C in As-Welded condition and is of radiographic quality Maxfil-12R is designed for single and multi-pass welding of low and medium carbon steels like; SA-36, A/B/C/D grades of SA-283, A/B/C grades of SA-285, A/B grades of SA-414, etc.

Approvals

ABS

BIS

DNV

EIL

IBR

IRS

RD & SO Cl

CHEMICAL COMPOSITION OF ALL WELD METAL (%)

Element	C	Mn	Si	S	P
Typical	0.08	1.40	0.50	0.015	0.015

MECHANICAL PROPERTIES OF ALL WELD METAL

Property	UTS	YS	El	CNV Impact (Joules)
	(MPa)	(MPa)	(L= 4d)%	at -20°C
Typical	550	480	28.0	75

WELDING PARAMETER: DC (+)

Diameter (mm)	Horizontal/ Flat	Horizontal/ Flat	Vertical UP	Vertical UP	Overhead	Overhead
	Volt, V	Current, A	Volt, V	Current, A	Volt, V	Current, A
1.20	23-30	160-260	22-26	150-220	23-26	150-220
1.60	25-34	180-300	21-27	180-250	22-27	150-230

PACKING

STANDARD SIZE : 1.20 & 1.60mm. Other diameters may be available on request.

QUANTITY : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.

SHIELDING GAS

100% CO2 & Mixture of Ar-CO2 at flow rate 15-20LPM.

WELDING POSITIONS

H, F, VU, OH

Mild Steel Wire