- HOME
- Conventional Welding Consumables
- Mild Steel Wire
- MAXFIL-12R-RDSO
Mild Steel Wire
MAXFIL-12R-RDSO
AWS: SFA 5.20 E71T1-C/T12-C
EN ISO CODE: 17632-BT492T1-1CA-K
Maxfil-12R is an all position mild steel flux cored wire designed for optimum performance when using 100% CO2 shielding. The wire is characterized with smooth metal transfer, uniform welding even on vertical-up stringer beads and easy slag removal. Filler contour is flat to slightly convex with equal leg lengths and uniform sidewall wetting. Weld metal is of radiographic quality.
Maxfil-12R is designed for single and multi-pass welding of low and medium carbon steels like; SA-36, A/B/C/D grades of SA-283, A/B/C grades of SA-285, A/B grades of SA-414, etc.
| Element | C | Mn | Si | S | P | Ni | Cr | V | Cu |
| Range | 0.15 | 1.60 | 0.90 | 0.030 | 0.040 | 0.50 | 0.20 | 0.080 | 0.40 |
| Typical | 0.053 | 1.40 | 0.47 | 0.007 | 0.015 | 0.019 | 0.012 | 0.010 | 0.008 |
| Property | UTS | YS | El | R.A. | CNV Impact (Joules) |
| (MPa) | (MPa) | (L= 4d)% | % | at -20°C | |
| Range | 510 Min | 350 Min | 26.0 Min | 50.0 Min | 47 Min |
| Typical | 550 | 480 | 29 | 61 | 62 |
| Diameter (mm) | Horizontal/Flat | Horizontal/Flat | Over Head | Over Head | Vertical UP | Vertical UP |
| Volt, V | Current, A | Volt, V | Current, A | Volt, V | Current, A | |
| 1.20 | 24-28 | 160-260 | 22-25 | 100-160 | 20-22 | 100-160 |
| 1.60 | 24-28 | 180-300 | 22-25 | 110-200 | 20-22 | 110-200 |
H, F, VU, OH
Carbon Dioxide CO (100%) at flow rate 12-15 litres Per Minute.
Standard size : 1.20 & 1.60mm. Other diameters may be available on request.
Quantity : Supply approximately 11Kgs in a plastic spool & total weight of the box 12.5 Kgs maximum. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.
