• Nickel and its Alloys FW 1225 - ERNiCrCoMo-1
ENQUIRE NOW

Nickel and its Alloys

FW 1225

AWS: SFA 5.14 ERNiCrCoMo-1

EN ISO CODE:

FW 1225 is a solid wire for GTAW available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality welds. It is used for welding Nickel-Chromium-Cobalt-Molybdenum alloys to themselves and to steel and for surfacing steel with Ni-Cr-Co-Mo weld metal. It is also used for applications where optimum strength and oxidation resistance is required above 820oC up to 1150oC especially when welding on base metal of Nickel-Iron- Chromium alloys. Specially recommended for welding furnace heating elements, reformer tubes etc.

Approvals
CHEMICAL COMPOSITION OF ALL WELD METAL (%)

 

Element C Mn Fe P S Si Cr Ni Mo Co Ti Cu Al
Percent 0.08 0.80 1.5 0.015 0.008 0.30 22.0 53.0 9.0 12.0 0.20 0.20 1.10

    

MECHANICAL PROPERTIES OF ALL WELD METAL

 

UTS Elongation
(MPa) (L= 4d)%
620 25.0

 

CURRENT AND PACKING DATA:

 

STANDARD SIZE :   Diameter 1.6 mm, 2.0 mm, 2.4 mm & 3.2 mm in cut lengths of 1000 mm each.

QUANTITY :   5 kg wire put in an air-tight polythene bag and finally packed in a plastic container. 

Identification AWS code is punched on both side of wire.

SHIELDING GAS:

 

Argon

CURRENT CONDITION:

 

DCEN

WELDING POSITION:

 

H, F, VU, OH

Nickel and its Alloys

Nickel and its Alloys FW 1250 - ERNiCu-7
FW 1250

ERNiCu-7

Nickel and its Alloys FW 1223 -ERNiCrMo-3
FW 1223

ERNiCrMo-3

Nickel and its Alloys FW TI-2 - ERTI-2
FW Ti-2

ERTi-2

Nickel and its Alloys FW 1280 - ERNi-1
FW 1280

ERNi-1

Nickel and its Alloys FW 1423 - ERNiCrMo-10
FW 1423

ERNiCrMo-10

Nickel and its Alloys FW 1400 - ERNiCrMo-4
FW 1400

ERNiCrMo-4

Nickel and its Alloys FW 1227 - ERNiCrCoMo-7
FW 1227

ERNiCrMo-7

Nickel and its Alloys FW 1414 ERNiCrMo-14
FW 1414

ERNiCrMo-14

Nickel and its Alloys FW NiCr-3 - ERNiCr-3
FW NiCr-3

ERNiCr-3

FW Ni-CI

5.15: ERNi-CI

Choose Any Option To Contact Us
×

Contact Us


Loading