- HOME
- Conventional Welding Consumables
- Solid Wires
- AUTOTHERME Ni-CI
Solid Wires
AUTOTHERME Ni-CI
AWS: SFA 5.15 ERNi-CI
EN ISO CODE:
Autotherme Ni-CI is used to join ordinary gray irons to themselves, or to other ferrous and nonferrous materials, and to reclaim or repair castings. Satisfactory welds can be produced on small and medium size castings where the welding stresses are not overly severe, or where the phosphorus content of the iron is not high. Because of the lower strength & ductility of weld metal these wire rods should be used where machinability of diluted filler metal is necessary. These filler rods can also be used on malleable or ductile iron.
| Elements | C | Mn | Si | S | Fe | Ni | Cu |
|---|---|---|---|---|---|---|---|
| Percent | 1.0 | 2.5 | 0.75 | 0.03 | 4.0 | 90min | 4.0 |
|
UTS (MPa) |
YS (Mpa) |
Elongation (L=5d)% |
Hardness (BHN) |
|---|---|---|---|
| 320 | 275 | 5 | 200 |
Argon
DCEN
H, F, VU, OH
STANDARD SIZE: Diameter 0.8mm, 1.2mm.
QUANTITY : 12.5 kgs wire, layer wound in a plastic spool that confirms to DIN8559 SD-300.
