- HOME
- Conventional Welding Consumables
- Low Alloy Steel Wire
- MAXFIL- 1101G5
Low Alloy Steel Wire
MAXFIL- 1101G5
AWS: SFA 5.29 E110T5-GC
EN ISO CODE:
Maxfil-1101G5 is a low alloy steel flux cored wire designed for welding of high tensile strength steel, quenched & tempered steels, etc. The weld metal also results good impact resistance property at sub-zero temperatures. The wire gives optimum performance under CO2 shielding with radiographic quality weld deposits. The weld has excellent bead appearance and easy slag removal.
Maxfil-1101G5 is designed for single and multi-pass welding of similar composition steels and equivalent grade steels like; HY-80, Sumiten-610, C/D grades of SA-225, B/C grades of SA-543, steels conforming to SA-612 grade, A/B/C grades of SA-738, etc.
| Element | C | Mn | Si | S | P | Ni | Mo |
| Typical | 0.080 | 1.42 | 0.46 | 0.012 | 0.018 | 2.20 | 0.36 |
| Property | UTS | YS | El | CNV Impact (Joules) | CNV Impact (Joules) |
| (MPa) | (MPa) | (L= 4d)% | at -40°C | at -51°C | |
| As Weld | 815 | 710 | 20.0 | 67 | 45 |
| Diameter (mm) | Horizontal | Horizontal | Flat | Flat | Vertical UP | Vertical UP |
| Volt, V | Current, A | Volt, V | Current, A | Volt, V | Current, A | |
| 1.20 | 24-28 | 160-260 | 24-28 | 160-260 | 18-22 | 100-160 |
| 1.60 | 24-28 | 180-300 | 24-28 | 180-300 | 18-22 | 110-200 |
STANDARD SIZE : 1.20 & 1.60mm. Other diameters may be available on request.
QUANTITY : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.
Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.
H, F, VU
Low Alloy Steel Wire
