Maxfil-38R is a low alloy steel flux cored wire designed for welding of moderate strength fine-grained steels to meet sub-zero impact resistance property down to -18°C. The wire is suitable for positional welding application, results easy slag removal and has excellent welders appeal. Weld bead is smooth & uniform and satisfies the requirements of radiographic quality.
Maxfil-38R is designed for single and multi-pass welding of similar composition steels and equivalent grade steels like; A/B grades of SA-203, A/B/C grades of SA-662, etc. This wire is used for fabrication of penstock pipelines, pressure vessels & valves, refineries, off-shore structures and similar applications, etc.
|Property||UTS||YS||El||CVN Impact (Joules)|
|(MPa)||(MPa)||(L= 4d)%||at - 20°C|
|Range||620-760||540 Min||17.0 Min||27 Min|
|Diameter (mm)||Horizontal/ Flat||Horizontal/ Flat||Vertical UP||Vertical UP||Overhead||Overhead|
|Volt, V||Current, A||Volt, V||Current, A||Volt, V||Current, A|
STANDARD SIZE: 1.20 & 1.60 mm. Other diameters may be available on request.
QUANTITY: Supplied approximately 15 Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.
Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.
H, F, VU, OH