- HOME
- Conventional Welding Consumables
- Low Alloy Steel Wire
- MAXFIL- 901G5
Low Alloy Steel Wire
MAXFIL- 901G5
AWS: SFA 5.29 E90T5-GC
EN ISO CODE:
Maxfil-901G5 is a low alloy steel flux cored wire designed for welding of high tensile strength steel, quenched & tempered steels, etc. where sub-zero impact resistance property of the weld metal is also desired. The wire gives optimum performance under CO2 shielding with radiographic quality weld deposits. The weld has excellent bead appearance and easy slag removal with diffusible hydrogen of less than 4ml/100gms of weld metal.
Maxfil-901G5 is designed for single and multi-pass welding of similar composition steels and equivalent grade steels like; HY-80, NAXTRA-60/65, Sumiten-610, A/B grades of SA-203, A/B/C grades of SA-662, B/C grades of SA-737, etc.
| Element | C | Mn | Si | S | P | Ni | Mo |
| Typical | 0.050 | 1.48 | 0.42 | 0.012 | 0.018 | 1.80 | 0.30 |
| Property | UTS | YS | El | CNV Impact (Joules) | CNV Impact (Joules) |
| (MPa) | (MPa) | (L= 4d)% | at -30°C | at -51°C | |
| As Weld | 716 | 620 | 21.0 | 96 | 50 |
| Diameter (mm) | Horizontal | Horizontal | Flat | Flat | Vertical UP | Vertical UP |
| Volt, V | Current, A | Volt, V | Current, A | Volt, V | Current, A | |
| 1.20 | 24-28 | 160-260 | 24-28 | 160-260 | 18-22 | 100-160 |
| 1.60 | 24-28 | 180-300 | 24-28 | 180-300 | 18-22 | 110-200 |
STANDARD SIZE : 1.20 & 1.60mm. Other diameters may be available on request.
QUANTITY : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.
Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.
H, F, VU
Low Alloy Steel Wire
