Flux

MAXFLUX SS -4 (LT)

Maxflux SS-4 (LT) is a fluoride basic agglomerated type flux suitable for welding of austenitic stainless steel and heat resistant steels. The flux behavior to carbon content of the weld metal is neutral. So, using suitable wire, low carbon stainless steels can easily be welded. The flux offers good slag detachability, smooth weld finish and less than 5ml diffusible hydrogen per 100 gm of weld metal.

Maxflux SS-4 flux (LT) can be used with various low carbon stainless steel wires for joining & for overlay applications. Weld metal meet impact toughness at -196°C requirements. The flux is also suitable to weld with various Cr-Mo steels & stabilized grade stainless steels.

Precaution

Re-dry the flux at 300-350°C for two hours before use.

Approvals

L&T

CHEMICAL COMPOSITION OF ALL WELD METAL (%)

WITH SAW WIRE	Elements	C	Mn	Si	S	P	Ni	Mo	Cu
AUTOTHERME GRADE-308L	Typical	0.030	1.200	0.350	0.030	0.025	9.80	-	0.30
AUTOTHERME GRADE-316L	Typical	0.030	1.200	0.350	0.030	0.025	12.50	2.30	0.30