Contact Us
HOME> Conventional Welding Consumables > MAXFIL- 81A1

DOWNLOAD SPECS

Low Alloy Steel Wire

MAXFIL- 81A1

AWS: SFA 5.29 E81T1-A1C EN ISO CODE: 17632-B T55ZT1-1CP 2M3

Maxfil-81A1 is an all position low alloy steel flux cored wire designed for welding of 0.5% Molybdenum and 1% Chromium and 0.5% Molybdenum steels. The wire gives optimum performance under 100% CO2 shielding with radiographic quality weld deposits. The wire produces full slag covering. Slag detachability is very good and is of fast freezing nature.

Maxfil-81A1 is designed for single and multi-pass welding of similar composition steels and equivalent grade steels like; Gr. F1 of SA-182 and SA-336, Gr. A of SA-204, Gr. T1/T1a/T1b of SA-209, Gr. WC1 of SA-217, Gr. A of SA-302, Gr. P1 of SA-335, Class 1 of A grade of SA-533, etc.

Approvals
    CE
CHEMICAL COMPOSITION OF ALL WELD METAL (%)


Element
CMnSiSPMo
Range
0.121.250.800.0300.0300.40-0.65
Typical0.0651.100.450.0150.0180.052


MECHANICAL PROPERTIES OF ALL WELD METAL


Property
UTSYSEl
CNV Impact (Joules)

(MPa)
(MPa)
(L= 4d)%
at RT°C
Range
550-690470 Min
19.0 Min-
SR:620°C/1Hr
59651024.0
85
WELDING PARAMETER: DC (+)


Diameter (mm)Horizontal/ FlatHorizontal/ Flat Vertical UPVertical UP
OverheadOverhead

Volt, VCurrent, AVolt, V
Current, AVolt, V
Current, A
1.2024-28
160-26020-26
100-18022-28
100-180
1.6024-28
180-30020-26110-200
22-28
110-220
PACKING


STANDARD SIZE :   1.20 & 1.60mm. Other diameters may be available on request.

QUANTITY :   Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.

SHIELDING GAS


Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.

WELDING POSITIONS


H, F, VU, OH