D&H 1229(NS) - ENiCrFe-9
DOWNLOAD SPECS
DOWNLOAD SPECS

Electrodes for Nickel and it's Alloys

D&H 1229(NS)

AWS: SFA 5.11 ENiCrFe-9

D&H1229 (NS) is a non-synthetic nickel base electrode. It gives soft and smooth arc, which is easy to strike and re-strike. The weld metal is of radiographic quality and displays a good combination of strength and impact strength even at minus 196°C. Electrodes of sizes up to 3.15 mm dia can be used for welding in all positions. It is recommended to use other sizes in horizontal and flat positions for achieving better results. Ideal for welding 9% Nickel steel for cryogenic storage tanks for LNG and other similar alloys as well as the clad side of joints in steel clad with a Ni-Cr-Fe alloy and for welding Ni-Cr-Fe alloys to steel and to other nickel base alloys.

Precaution

1. Ensure the electrodes are dry. Re-dry the electrodes at 300-325°C for one hour.

2. Operate the electrodes wherever possible, weld in flat position only.

3. Maintain a short arc, use stringer bead and minimize the heat input.

TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL


Element
CMnSiPSNiMoCrWFeNb+Ta
Percent
0.091.5
0.500.0180.01468.04.014.01.09.01.5


TYPICAL MECHANICAL PROPERTIES OF ALL WELD METAL


UTSElongation
(MPa)
(L= 4d)%
69027.0


CURRENT AND PACKING DATA: DC (+)


Size (mm)

Dia x Length

5x3504x350
3.15x350
2.5x350
Current Range (Amps)
150-180
120-150
80-110
60-70
Weight/Carton (kgs)
2.52.5
2.5
2.5


Electrodes for Nickel and it's Alloys

Contact Us

Choose any option to contact us